- All
- Product Name
- Product Keyword
- Product Model
- Product Summary
- Product Description
- Multi Field Search
 |
SEH Single Stage End Suction Pump
DNl32—400
2200m3/h
250m
Centrifugal Pump
| Quantity: | |
|---|---|
High brackish water, seawater desalination booster process; Energy recovery process
Zero discharge liquid process for high pressure membrane booster system;
Boiler condensate circulation;
Other cleaning fluids with high temperatures and/or high pressures.
Pump Body | A double volute design Rotor back-pumping design, easy to maintain without affecting the pipeline; Adopt central support, installation form is APl610 OH2; Reduces the increase in the different axialities between the pump and the drive caused by high pressure (or high temperature) operation, thereby increasing the stability of operation and prolonging the service life of the equipment. |
Impeller | Closed impeller, higher hydraulic efficiency; Excellent hydraulic model and precision casting, making it efficient and energy-saving; If necessary, the inducer wheel can be added to improve the necessary NPSH; |
Shaft | Heavy load shaft, the shaft offset is minimized under maximum heavy load to ensure the good operation of the components on the shaft, the pump operation is more stable, the bearing and mechanical seal have a longer life, and the maintenance and repair costs are reduced. |
Shaft Seal | Cartridge mechanical seals withstanding high pressures; |
Bearing Body | Heavy load design with a large capacity oil chamber to ensure long-term reliable operation of the bearing Use of high load cylindrical and thrust bearings, lubricated with dilute oil; |
Coupling | Optionally configured with diaphragm coupling, column pin coupling, etc.; |
Parts | Modular design, high degree of versatility, reduced spare parts inventory |
Thickened wall thickness | in addition to meeting the strength and increasing the corrosion margin, prolonging the applicable life. |
Flange | It can be manufactured according to GB、ANSI、DIN、JIS and other standards; |
The SEH end suction centrifugal pump comes supplied in Cast Steel, Copper, 304SS, 316SS, 316LSS Duplex Stainless Steel and Super Duplex.
| End Suction Centrifugal Pumps | ||||||
Parts | 304 SS | 316 SS | 316L SS | CD4MCuDuplex stainless steel | 2205Duplex stainless steel | 2507Duplex stainless steel |
Impeller | 304 SS | 316 SS | 316L SS | CD4MCu | 2205 DSS | 2507 DSS |
Spindle | 304 SS | 316 SS | 316L SS | 2205 DSS | 2205 DSS | 2507 DSS |
Bearing Body | QT450-10/cast steel | QT450-10/cast steel | QT450-10/cast steel | QT450-10/cast steel | QT450-10/cast steel | QT450-10/cast steel |
Impeller Nut | 304 SS | 316 SS | 316L SS | CD4MCu | 2205 DSS | 2507 DSS |
Machine Seal Gland | 304 SS | 316 SS | 316L SS | CD4MCu | 2205 DSS | 2507 DSS |
Bearing Body | SKF | SKF | SKF | SKF | SKF | SKF |
Machinery Seal | SiC-SiC/304/F | SiC-SiC/316L/F | SiC-SiC/316L/F | SiC-SiC/2205/F | SiC-SiC/2205/F | SiC-SiC/2507/F |
Coupling Flange | HT250 | HT250 | HT250 | HT250 | HT250 | HT250 |
Drive Pin | Rubber clad steel core | Rubber clad steel core | Rubber clad steel core | Rubber clad steel core | Rubber clad steel core | Rubber clad steel core |
Common Base | steel structure | steel structure | steel structure | steel structure | steel structure | steel structure |
| NO. | PARTS | NO. | PARTS | NO. | PARTS |
| 01 | Pump Body | 11 | Machine Seal Gland | 21 | Suspension Support Bracket Fastening Bolts |
| 02 | Impeller Nut | 12 | Socket Head Cap Screws | 22 | Bearing |
| 03 | Impeller Nut Washer | 13 | Water Retaining Ring | 23 | Impeller Key |
| 04 | Impeller | 14 | Bearing Gland Fastening Bolts | 24 | Axis |
| 05 | Pump Body Gasket | 15 | Bearing Gland | 25 | Pump Coupling Key |
| 06 | Pump Cover | 16 | Bearing Gland Gasket | 26 | Bearing |
| 07 | Pump Body/Cover Fastening Bolts | 17 | Frame | 27 | Bearing Gland Gasket |
| 08 | Mechanical Seal Ring | 18 | Rotor Repair Rings | 28 | Bearing Gland |
| 09 | Mechanical Seal Static Ring | 19 | Pump cover Frame fastening bolts | 29 | Bearing Gland Fastening Bolts |
| 10 | Machine Seal Gland O-Ring | 20 | Support frame | 30 | Mechanical Seal O-ring |
SEH Single Stage End Suction Pumps Performance Parameters.pdf
SEH Single Stage End Suction Pumps Installation Dimensions.pdf
DTRO
Complete Horizontal Centrifugal Pump With Motor:
SEH50-32-250/2P-11KW
Medium: free of impurities, 10m3/h, 80m, 2950rpm, pump inlet pressure 6.0MPa.
Pump housing material: 316SS
Impeller material: 316SS
Spindle: 2205DSS, Bearing NSK
Thin oil lubrication, equipped with labyrinth oil seal;
Cartridge mechanical seal;
Common channel steel structure base; Flexible column pin couplings and guards.
Siemens IE2 motors (China 3 energy efficiency), 380V50HZ/3-phase, IP55/F/B
Pump body center support, designed pressure 6.3MPa.
SWRO
Complete Horizontal Centrifugal Pump With Motor
SEH50-32-125/2P-3KW
24m3/h, 15M, 2950rpm, pump inlet pressure 6.0MPa.
Pump housing material: 2205DSS
Impeller material: 2205DSS
Spindle: 2205DSS, Bearing NSK/SKF
Thin oil lubrication, equipped with labyrinth oil seal;
Cartridge mechanical seal;
Common channel steel structure base; Flexible column pin couplings and guards.
Siemens IE2 motors (China 3 energy efficiency), 380V50HZ/3-phase, IP55/F/B
Designed pressure 7.2MPa.
High brackish water, seawater desalination booster process; Energy recovery process
Zero discharge liquid process for high pressure membrane booster system;
Boiler condensate circulation;
Other cleaning fluids with high temperatures and/or high pressures.
Pump Body | A double volute design Rotor back-pumping design, easy to maintain without affecting the pipeline; Adopt central support, installation form is APl610 OH2; Reduces the increase in the different axialities between the pump and the drive caused by high pressure (or high temperature) operation, thereby increasing the stability of operation and prolonging the service life of the equipment. |
Impeller | Closed impeller, higher hydraulic efficiency; Excellent hydraulic model and precision casting, making it efficient and energy-saving; If necessary, the inducer wheel can be added to improve the necessary NPSH; |
Shaft | Heavy load shaft, the shaft offset is minimized under maximum heavy load to ensure the good operation of the components on the shaft, the pump operation is more stable, the bearing and mechanical seal have a longer life, and the maintenance and repair costs are reduced. |
Shaft Seal | Cartridge mechanical seals withstanding high pressures; |
Bearing Body | Heavy load design with a large capacity oil chamber to ensure long-term reliable operation of the bearing Use of high load cylindrical and thrust bearings, lubricated with dilute oil; |
Coupling | Optionally configured with diaphragm coupling, column pin coupling, etc.; |
Parts | Modular design, high degree of versatility, reduced spare parts inventory |
Thickened wall thickness | in addition to meeting the strength and increasing the corrosion margin, prolonging the applicable life. |
Flange | It can be manufactured according to GB、ANSI、DIN、JIS and other standards; |
The SEH end suction centrifugal pump comes supplied in Cast Steel, Copper, 304SS, 316SS, 316LSS Duplex Stainless Steel and Super Duplex.
| End Suction Centrifugal Pumps | ||||||
Parts | 304 SS | 316 SS | 316L SS | CD4MCuDuplex stainless steel | 2205Duplex stainless steel | 2507Duplex stainless steel |
Impeller | 304 SS | 316 SS | 316L SS | CD4MCu | 2205 DSS | 2507 DSS |
Spindle | 304 SS | 316 SS | 316L SS | 2205 DSS | 2205 DSS | 2507 DSS |
Bearing Body | QT450-10/cast steel | QT450-10/cast steel | QT450-10/cast steel | QT450-10/cast steel | QT450-10/cast steel | QT450-10/cast steel |
Impeller Nut | 304 SS | 316 SS | 316L SS | CD4MCu | 2205 DSS | 2507 DSS |
Machine Seal Gland | 304 SS | 316 SS | 316L SS | CD4MCu | 2205 DSS | 2507 DSS |
Bearing Body | SKF | SKF | SKF | SKF | SKF | SKF |
Machinery Seal | SiC-SiC/304/F | SiC-SiC/316L/F | SiC-SiC/316L/F | SiC-SiC/2205/F | SiC-SiC/2205/F | SiC-SiC/2507/F |
Coupling Flange | HT250 | HT250 | HT250 | HT250 | HT250 | HT250 |
Drive Pin | Rubber clad steel core | Rubber clad steel core | Rubber clad steel core | Rubber clad steel core | Rubber clad steel core | Rubber clad steel core |
Common Base | steel structure | steel structure | steel structure | steel structure | steel structure | steel structure |
| NO. | PARTS | NO. | PARTS | NO. | PARTS |
| 01 | Pump Body | 11 | Machine Seal Gland | 21 | Suspension Support Bracket Fastening Bolts |
| 02 | Impeller Nut | 12 | Socket Head Cap Screws | 22 | Bearing |
| 03 | Impeller Nut Washer | 13 | Water Retaining Ring | 23 | Impeller Key |
| 04 | Impeller | 14 | Bearing Gland Fastening Bolts | 24 | Axis |
| 05 | Pump Body Gasket | 15 | Bearing Gland | 25 | Pump Coupling Key |
| 06 | Pump Cover | 16 | Bearing Gland Gasket | 26 | Bearing |
| 07 | Pump Body/Cover Fastening Bolts | 17 | Frame | 27 | Bearing Gland Gasket |
| 08 | Mechanical Seal Ring | 18 | Rotor Repair Rings | 28 | Bearing Gland |
| 09 | Mechanical Seal Static Ring | 19 | Pump cover Frame fastening bolts | 29 | Bearing Gland Fastening Bolts |
| 10 | Machine Seal Gland O-Ring | 20 | Support frame | 30 | Mechanical Seal O-ring |
SEH Single Stage End Suction Pumps Performance Parameters.pdf
SEH Single Stage End Suction Pumps Installation Dimensions.pdf
DTRO
Complete Horizontal Centrifugal Pump With Motor:
SEH50-32-250/2P-11KW
Medium: free of impurities, 10m3/h, 80m, 2950rpm, pump inlet pressure 6.0MPa.
Pump housing material: 316SS
Impeller material: 316SS
Spindle: 2205DSS, Bearing NSK
Thin oil lubrication, equipped with labyrinth oil seal;
Cartridge mechanical seal;
Common channel steel structure base; Flexible column pin couplings and guards.
Siemens IE2 motors (China 3 energy efficiency), 380V50HZ/3-phase, IP55/F/B
Pump body center support, designed pressure 6.3MPa.
SWRO
Complete Horizontal Centrifugal Pump With Motor
SEH50-32-125/2P-3KW
24m3/h, 15M, 2950rpm, pump inlet pressure 6.0MPa.
Pump housing material: 2205DSS
Impeller material: 2205DSS
Spindle: 2205DSS, Bearing NSK/SKF
Thin oil lubrication, equipped with labyrinth oil seal;
Cartridge mechanical seal;
Common channel steel structure base; Flexible column pin couplings and guards.
Siemens IE2 motors (China 3 energy efficiency), 380V50HZ/3-phase, IP55/F/B
Designed pressure 7.2MPa.
